Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UBE Nylon 1022 FDX99 - PA6 - UBE

Material Data Center offers the following functions for UBE Nylon 1022 FDX99:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ube Nylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés thermiques - Propriétés optiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 215 °C ISO 11357-1/-3
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Brillant 155 - ASTM D 2457
Haze 0.5 % ASTM D 1003
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1140 kg/m³ ISO 1183
Caractéristiques
Transformation
Extrusion a film soufflé, Extrusion de films
Propriétés spéciales
Transparent
Caractéristiques
Nuclée
Résistance Chimique
Résistance à oxydation
Certifications
Contact alimentaire, FDA 21 CFR approbation
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.